ARALDITE® 2051
![50mm-txt](https://biesterfeld.no/wp-content/uploads/2020/06/50mm-txt.png)
![image5](https://biesterfeld.no/wp-content/uploads/2020/06/image5.png)
![image3](https://biesterfeld.no/wp-content/uploads/2020/06/image3.png)
Make fast repairs in cold and humid conditions
Bond fast and on-the-go in harsh and humid conditions and reduce asset downtime by up to 50%.
![Araldite 2051](https://biesterfeld.no/wp-content/uploads/2020/06/Sail-2051-main.jpg)
Bonding and repair at sea with ARALDITE® 2051 adhesive
- The challenge
Repair and finish small to medium-sized components after a ship has left the controlled conditions of the shipyard and is exposed to a wet, cold environment. - The solution
Packed in handy and safe cartridges, ARALDITE® 2051 adhesive is a valuable tool to keep onboard. This adhesive will help you speed up repairs and get back to operation quickly, reducing your downtime by up to 50%.
With ARALDITE® 2051 adhesive, you can bond any kind of material outdoors – and even underwater. This non-sagging adhesive is easily applied vertically and overhead for both small fixes and major repairs.
![image5](https://biesterfeld.no/wp-content/uploads/2020/06/image5.png)
![image3](https://biesterfeld.no/wp-content/uploads/2020/06/image3.png)
* Temperatures below 0°C or above 40°C will slow down or increase cure rate significantly.
** For the maximum continuous operating temperature, we consider the maximum temperature for which the residual Lap Shear Strength is 1/3 of the Lap Shear Strength at room temperature or the temperature for which the residual Lap Shear Strength is 5 MPa.
![image15](https://biesterfeld.no/wp-content/uploads/2020/06/image15.jpeg)
ARALDITE® 2023
two-component acrylic adhesive
Extremely flexible for thick bond lines and heavy loads. Simple assembly of large, complex parts
![image5](https://biesterfeld.no/wp-content/uploads/2020/06/image5.png)
![image3](https://biesterfeld.no/wp-content/uploads/2020/06/image3.png)