ARALDITE® 2015-1
High dynamic load resistance, high stiffness, and high-end performance
ARALDITE® 2015-1 adhesive combines the properties of high elongation and gap filling, which allows you to firmly join and seal large parts without sagging
Pack sizes (mix ratio 1:1): 50 ml cartridge / 200 ml cartridge / 380 ml cartridge / 2 kg
working pack / 25 kg pail / 250 kg bulk
Create strong bonds that are ready for high speeds.
Speedboat deck-to-hull bonding with ARALDITE® 2015-1 adhesive
- The challenge
A primeless deck-to-hull adhesive was needed on an 8.5 m vinylester speedboat meeting Lloyd’s Register specifications. - The solution
ARALDITE® 2015-1 adhesive withstands cruise speeds up to 99 km/h, making it an effective solution for speedboats. The long open time makes this adhesive a cost-effective bonding solution. Application via cartridges is possible, with no need to invest in a dosing unit.
Additionally, we can help ensure your qualification by providing extensive testing. Our unique simulation capabilities predict outcomes with a 90% success rate, helping you minimize trial and error.
ARALDITE® 2023 adhesive
Extremely flexible for thick bond lines and the heavy load. Simple assembly of large, complex parts
ARALDITE® 2051 adhesive
Fast repairing in warm, cold & humid conditions. Reliable bond in automated assembly line
ARALDITE® 2015-1 adhesive
Dynamic loads resistant, high stiffness and high-end performance
* Temperatures below 0°C or above 40°C will slow down or increase cure rate significantly.
** For the maximum continuous operating temperature, we consider the maximum temperature for which the residual Lap Shear Strength is 1/3 of the Lap Shear Strength at room temperature or the temperature for which the residual Lap Shear Strength is 5 MPa.
ARALDITE® 2023
two-component acrylic adhesive
Extremely flexible for thick bond lines and heavy loads. Simple assembly of large, complex parts
