ARALDITE® 2023
![30mm](https://biesterfeld.no/wp-content/uploads/2020/06/30mm.png)
Extremely flexible for thick bond lines and heavy loads
![image5](https://biesterfeld.no/wp-content/uploads/2020/06/image5.png)
![image3](https://biesterfeld.no/wp-content/uploads/2020/06/image3.png)
Fast and efficient parts bonding with long-term resistance to impact and fatigue.
![image28](https://biesterfeld.no/wp-content/uploads/2020/06/image28-1.jpeg)
Deck-to-hull bonding with ARALDITE® 2023 adhesive
- The challenge
Deck-to-hull bonding requires high elongation and high E-modulus, combined with high-bond-thickness to compensate for large production tolerances. - The solution
Thanks to its high gap-filling capabilities and elongation of >100%, ARALDITE® 2023 adhesive compensates for production tolerances with no need for primer.
With enhanced long distance pumpability, the bonding process is fast and efficient. The result is a durable bond that eliminates future maintenance and refitting needs.
![image5](https://biesterfeld.no/wp-content/uploads/2020/06/image5.png)
![image3](https://biesterfeld.no/wp-content/uploads/2020/06/image3.png)
Create a cleaner bond and reduce production time by up to 50%.
![image29](https://biesterfeld.no/wp-content/uploads/2020/06/image29.jpeg)
Bonding internal partitions with ARALDITE® 2023 adhesive
- The challenge
Replace and seal internal lamination. - The solution
ARALDITE® 2023-30 adhesive is 100%non-sagging, meaning you can easily apply it to complex surfaces, both vertical and overhead. With no need to apply primer, the panel is pre-positioned and the adhesive is injected, acting as structural loa
The combination of primeless application and a one-step bonding process can speed up the process by up to 50% and result in a cleaner assembly compared to the traditional lamination process..
![image5](https://biesterfeld.no/wp-content/uploads/2020/06/image5.png)
![image3](https://biesterfeld.no/wp-content/uploads/2020/06/image3.png)
![image15](https://biesterfeld.no/wp-content/uploads/2020/06/image15.jpeg)
ARALDITE® 2023
two-component acrylic adhesive
Extremely flexible for thick bond lines and heavy loads. Simple assembly of large, complex parts
![image13](https://biesterfeld.no/wp-content/uploads/2020/06/image13.jpeg)
ARALDITE® 2051
two-component acrylic adhesive
Fast repairing in cold & humid conditions. Reliable bond in automated assembly line
![Huntsman Marine Araldite 2015-1](https://biesterfeld.no/wp-content/uploads/2020/06/image14.jpeg)
ARALDITE® 2015-1
two component epoxy adhesive
Dynamic loads resistant, high stiffness and high-end performance
* Temperatures below 0°C or above 40°C will slow down or increase cure rate significantly.
** For the maximum continuous operating temperature, we consider the maximum temperature for which the residual Lap Shear Strength is 1/3 of the Lap Shear Strength at room temperature or the temperature for which the residual Lap Shear Strength is 5 MPa.
![image5](https://biesterfeld.no/wp-content/uploads/2020/06/image5.png)
![image3](https://biesterfeld.no/wp-content/uploads/2020/06/image3.png)